Service and support

Ignition: The engine Speed range cannot reach the Ignition RPM

Description: 1, ignition: engine Speed range down to 50% Ignition RPM

2, preheating: the engine Speed range drops below the Ignition RPM

3, acceleration: the engine Speed range drops below the Preheat RPM

4, running: the engine Speed range is lower than the set low Speed range

Description: 1, acceleration: engine Speed range up and down

2, acceleration: the engine Speed range is seriously reduced

1, ignition: the exhaust Max Temp is greater than the set high Max Temp value

2, preheating: exhaust Max Temp is greater than the set high Max Temp value

3, acceleration: exhaust Max Temp is greater than the set high Max Temp value for 4 seconds

Description: 1, preheating: the exhaust Max Temp drops seriously

2. When accelerating: the exhaust Max Temp drops seriously

Description: When running: exhaust Max Temp is less than 200 degrees

Remote control input signal loss, time higher than the set value

Description: Starting motor controller Max Temp is too high (brushless motor version only support)

Description: Oil pump motor controller Max Temp is too high (brushless motor version only support)

ECU operating current is higher than the design limit, different versions of ECU current limit is not the same